Pentek CBC-BB Carbon Block Filter Cartridge, 9-3/4″ x 4-5/8″, 0.5 Micron



Pentair Industries CBC-BB - Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Initial pressure drop of 4.

6 psi at a flow rate of 2 gpm. It has a nominal 85% filtration rating of 05 micron, and 99. 95% efficiency for the reduction of protozoan cysts. It will reduce free available chlorine fac at 2 parts per million ppm by at least 90% in up to 50, 000 gallons at a flow rate of 2 gallons per minute gpm. Nominal filtration rating of 0

Pentek CBC-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 0.5 Micron - 5 micron. Protozoan cysts include Giardia, Cryptosporidium, Entamoeba, and Toxoplasma. Bonded pac media with polyolefin wraps and polyethylene netting. This carbon block filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is for purification of residential and commercial drinking water.

SpecificationsNominal filtration rating05 microninitial pressure drop at 2 gpm4. 6 psiremoval of protozoan cysts99.

More information about Pentair Industries CBC-BB

Pentek GAC-10 Drinking Water Filter 9-3/4" x 2-7/8"


Pentair Industries GAC-10 - Pentek GAC-10 Drinking Water Filter 9-3/4" x 2-7/8" - The filter cartridge is manufactured to prevent channeling or bypass and maximize contact with the filter media. Designed for maximum adsorption with post-filter to reduce carbon fines. Ideal for general-purpose water filtration. The innovative post-filter reduces carbon fines before the water leaves the cartridge for cleaner, better tasting drinking water.

The pentek-gac-10 cartridge provides effective reduction of chlorine and bad taste and odor from your drinking water. Drop-in cartridge design allows for quick filter change on most standard 10 inch housings.

More information about Pentair Industries GAC-10


Similar products



Pentek EPM-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 10 Microns


Pentair Industries EPM-10 - Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. The cartridge has an initial pressure drop of 1. 5 pounds per square inch psi at a flow rate of 1 gallon per minute gpm, and operates over a temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Initial pressure drop of 1.

5 psi at a flow rate of 1 gpm. This cartridge is made of bonded powdered activated carbon PAC filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber Buna-N gaskets seal the cartridge against the housing sold separately. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 90%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Water filters remove undesirable particles, adsorption, and microorganisms from water by means of a semipermeable barrier, chemicals, or biological processes.

Pentek EPM-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 10 Microns - The filter will reduce free available chlorine FAC at 2 parts per million ppm by at least 90% in up to 3, 000 gallons at a flow rate of 1 gallon per minute gpm. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

More information about Pentair Industries EPM-10


Similar products



Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron


Pentair Industries ChlorPlus-10 - This pentek chlorplus 10 carbon block filter cartridge reduces chlorine and chloramine in residential and commercial drinking water. Designed for maximum adsorption with post-filter to reduce carbon fines. The filter has an initial pressure drop of 6 pounds per square inch psi at a recommended flow rate of 1 gpm, and operates over a temperature range of 40 to 125 degrees F 4.

4 to 51. 7 degrees C. Water filters are used in a wide range of applications, and irrigation, swimming pools, including drinking water purification, industrial processes, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. A santoprene gasket provides a watertight seal.

Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron - Bonded pac media with a polyolefin core and shell. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm. Reduces chlorine and chloramines in residential and commercial drinking water. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water.

More information about Pentair Industries ChlorPlus-10


Similar products



Pentek PD-5-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 5 Microns


Pentair Industries PD-1-934 - It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 2 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. It has a nominal filtration rating of 5 microns at an efficiency of 85%. This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications.

Pentek PD-5-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 5 Microns - SpecificationsNominal filtration rating5 micronsInitial pressure drop at 2 gpm. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release. This pentek pd-5-934 polypropylene filter cartridge reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications.

More information about Pentair Industries PD-1-934


Similar products



Pentek DGD-2501 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"


Pentair Industries DGD-2501 - This pentek dgd-2501 spun polypropylene filter cartridge reduces sand, commercial, silt, scale, and rust particles in residential, and municipal drinking water. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4.

4 to 62. 8 degrees C. This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water. Specificationsnominal filtration rating pre-filter25 micronsNominal filtration rating post-filter1 micronInitial pressure drop at 10 gpm.

Pentek DGD-2501 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" - The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges.

More information about Pentair Industries DGD-2501


Similar products



1M-4PK 1-Micron Sediment Water Filter Cartridge, 4-Pack


Ronaqua 1M-4PK - Reduces sand, scale, commercial, and rust particles in residential, silt, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. Reduces chlorine and chloramines in residential and commercial drinking water. Initial pressure drop of 6 psi at a flow rate of 1 gpm.

Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Lifetime: replace two or three times a year, depending on the water quality. This filter is wrapped and sealed and meets NSF Standards and Regulations. Initial pressure drop of 1.

1M-4PK 1-Micron Sediment Water Filter Cartridge, 4-Pack - 5 psi at a flow rate of 1 gpm. Bonded pac media with a polyolefin core and shell. Spun polypropylene for resistance to chemicals and bacteria. Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. Filters will fit any Residential Reverse Osmosis Unit that features standard 10" filter housing.

Designed for maximum adsorption with post-filter to reduce carbon fines.

More information about Ronaqua 1M-4PK


Similar products



Pentek WS-10 Water Softener 10”Cartridge, 155319-43


Pentek WS-10 - Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. 4-pack of standard 10" 1 Micron Sediment Filters. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm. Initial pressure drop of less than 2 psi at a flow rate of 2 gpm. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

It is made of sodium-based, non-solvent rinsed ion-exchange softening resin that meets Food and Drug Administration standards, and there are polypropylene pre- and post-filters to reduce the possibility of water bypassing the resin. Recommended flow rate of 050 gpm. Bonded pac media with a polyolefin core and shell.

Pentek WS-10 Water Softener 10”Cartridge, 155319-43 - Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. Reduces sand, scale, commercial, silt, and rust particles in residential, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. This filter is wrapped and sealed and meets NSF Standards and Regulations.

Designed for maximum adsorption with post-filter to reduce carbon fines.

More information about Pentek WS-10


Similar products



Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge


Pentair Industries DGD-5005-20 - The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 20 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4.

4 to 62. 8 degrees C. This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water. Specificationsnominal filtration rating pre-filter50 micronsNominal filtration rating post-filter5 micronsInitial pressure drop at 20 gpm.

Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge - It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. This pentek dgd-5005-20 spun polypropylene filter cartridge reduces sand, scale, silt, and rust particles in residential, commercial, and municipal drinking water.

More information about Pentair Industries DGD-5005-20


Similar products



iSpring US31 3-Stage Under Sink High Capacity Tankless Drinking Water Filtration System-Includes Sediment 2x Cto Carbon Block Filters


iSpring Water Systems US31 - Nominal filtration rating of 1 micron. Package Quantity: 1 Unit. Dimensions: 10" x 2. 5". Recommended flow rate of 050 gpm. Lifetime: replace two or three times a year, depending on the water quality. This filter is wrapped and sealed and meets NSF Standards and Regulations. Cation, sodium-form resin ion-exchange media with polypropylene pre- and post-filters.

Spun polypropylene for resistance to chemicals and bacteria. Reduces chlorine and chloramines in residential and commercial drinking water. Reduces sand, scale, and rust particles in residential, commercial, silt, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity.

iSpring US31 3-Stage Under Sink High Capacity Tankless Drinking Water Filtration System-Includes Sediment 2x Cto Carbon Block Filters - Lifetime support from ispring in Alpharetta, GA at 678 261-7611. Bonded pac media with a polyolefin core and shell. Micron rating: first stage: 50 Micron; Second Stage: 5 Micron. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water.

More information about iSpring Water Systems US31


Similar products



NSF Certified Compressed Carbon Block Filter, CTO Purity MAX,10", 1 Micron, WWC101


Purity Pro Filters WWC101 - 10, 000 gallon capacity. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Spun polypropylene for resistance to chemicals and bacteria. Micron rating: first stage: 50 Micron; Second Stage: 5 Micron. Reduces sand, and rust particles in residential, commercial, scale, silt, and municipal drinking water.

Combines two separate gradient layers for higher efficiency and dirt-loading capacity. With an atomic mass of 3 million~10 million u, this patented Ultra High Molecular Weight Polyethylene UHMWPE resin also binds more carbon together than normal resins, maximizing carbon surface area and chemical absorption.

NSF Certified Compressed Carbon Block Filter, CTO Purity MAX,10", 1 Micron, WWC101 - Lifetime support from ispring in Alpharetta, GA at 678 261-7611. This process increases the components capacity, removing more chlorine taste, odour and organic chemicals from the water than any other filter. Outside diameter Inch: 4-1/2. Designed for maximum adsorption with post-filter to reduce carbon fines.

Bonded pac media with a polyolefin core and shell. Thanks to its 1 µm nominal rating, this filter also functions as a performance sediment filter. 9 3/4 x 2 1/2 inches 9.

More information about Purity Pro Filters WWC101


Similar products