Blackmagic Design Micro Converter SDI to HDMI with Power Supply BMD-CONVCMIC/SH/WPSU


Supports sD and HD Signals. Hdmi and sdi Loop Outputs. Automatic Input Signal Detection. Blackmagic convcmicsh micro converter sdi-hdmi sd/hd/3g-sdi input. Software Control.

Blackmagic Design Micro Converter HDMI to SDI with Power Supply BMD-CONVCMIC/HS/WPSU

Automatic Input Signal Detection. Supports sD and HD Signals. 2 x sdi Outputs. Software Control. Blackmagic convcmichs micro converter hdmi-sdi hdmi input.


Similar products

Blackmagic Design Micro Converter SDI to HDMI (with Power Supply) BMD-CONVCMIC/SH/WPSU
Blackmagic Design SDI to HDMI Micro Converter, Without Power Supply
25 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
50 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
MOKOSE 3.3Ft(1M) 3G HD-SDI Cables 75 Ohm SDI BNC Male Silver-plated Coax Cable , BNC to BNC For MOKOSE USH3001
AJA U-TAP SDI Simple USB 3.0 Powered SDI Capture Device
Blackmagic Design Teranex Mini Smart Panel
Blackmagic Design HDMI to SDI Micro Converter, without Power Supply
Blackmagic Design Micro Converter BiDirectional SDI/HDMI/PSU
Blackmagic Design Web Presenter


50 foot Black BJC 3G/6G HD SDI cable Belden 1694A, BNC to BNC

The cable is rated cmr, making it lawful for installation in walls, cable trays, and risers--anywhere but in a plenum. It has an 18 awg solid copper center conductor and a combination shield consisting of a 100% coverage, two-sided foil layer overlaid by a 95% coverage tinned copper braid for maximum shield effectiveness at all frequencies.

Between is a foamed hdpe dielectric, which provides for the lowest possible capacitance, and best possible impedance consistency, in any precision video cable. Automatic Input Signal Detection. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI. Coax is stripped with precise dimensional control in our Swiss-made Schleuniger coaxial cable strippers, resulting in a shield braid undamaged by stripping and a center conductor of consistent maximum length for full engagement in the BNC pin crimp.

. Dense two-layered foil and 95% tinned copper braid shield provide high shield performance. Hdmi input. The result is a cable which is not only superb in its electrical performance, but is physically robust and stable and will endure frequent handling and flexing. Bnc to bnc 3g/6g hd sdi cable, 50 foot, black, blue jeans cable brand This HD-SDI cable is built with precision video coax which has been sweep-tested to 4.

5 ghz and high-quality 75 ohm crimp-type BNCs.


Similar products

25 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
Blackmagic Design Micro Converter SDI to HDMI (with Power Supply) BMD-CONVCMIC/SH/WPSU
Blackmagic Design Micro Converter HDMI to SDI (with Power Supply) BMD-CONVCMIC/HS/WPSU
150 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
75 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
BJC 3G/HD SDI Cable, made with Canare L-4CFB Cable and Canare BNCs, 3 foot
Blackmagic Design Micro Converter BiDirectional SDI/HDMI/PSU
Blackmagic Design SDI to HDMI Micro Converter, Without Power Supply
Decimator Design MD-LX Bi-Directional HDMI/SDI Converter
J-Tech Digital Premium Quality SDI Splitter 1x4 Supports SD-SDI, HD-SDI, 3G-SDI up to 1320 Ft (1 Input and 4 outputs)


Blackmagic Design HDMI to SDI Micro Converter, without Power Supply

You get 2 sdi outputs, support for Level A and Level B equipment and power over USB! Hdmi input. Cable stock 100% sweep-tested to 4. 5 ghz to ensure full 3G/6G SDI performance. Automatic Input Signal Detection. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI.

Sdi video outputs: automatically matches the SD, HD or 3G-SDI HDMI video input. Take the hdmi output from laptop computers or consumer cameras and convert it to SDI for use with broadcast switchers, routers, monitors and more! The multi rate 3G-SDI automatically switches between all SD and HD formats up to 1080p60

Supports sD and HD Signals. Rated cmr for installation in walls and risers. Dense two-layered foil and 95% tinned copper braid shield provide high shield performance. Hdmi video inputs: HDMI Type A in. 2 x sdi Outputs. Software Control. Multi rate support: Auto detection of SD or HD. Blackmagic design hdmi to sdi micro Converter - Blackmagic Design 3 Year Limited Warranty.

Solid bare 18 awg etp Electrolytic Tough Pitch copper center conductor.


Similar products

Blackmagic Design SDI to HDMI Micro Converter, Without Power Supply
Blackmagic Design Micro Converter SDI to HDMI (with Power Supply) BMD-CONVCMIC/SH/WPSU
Blackmagic Design Micro Converter HDMI to SDI (with Power Supply) BMD-CONVCMIC/HS/WPSU
MOKOSE 3.3Ft(1M) 3G HD-SDI Cables 75 Ohm SDI BNC Male Silver-plated Coax Cable , BNC to BNC For MOKOSE USH3001
50 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
HDMI to SDI Converter Adapter HDMI SDI Adapter SDI/HD-SDI/3G-SDI Adapter Support 1080P for Camera Home Theater
Blackmagic Design Micro Converter BiDirectional SDI/HDMI/PSU
25 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
THE CIMPLE CO - BNC Compression Connector for RG6 Coaxial Cable | Solid Construction with High Grade Metals | Male BNC Connectors for CCTV, SDI, HD-SDI, Siamese, Security Camera | Pack of 25
SDI to HDMI Converter Adapter Mini 3G HD Sdi Hdmi Adapter for SD-SDI, HD-SDI and 3G-SDI signals


MOKOSE 3.3Ft1M 3G HD-SDI Cables 75 Ohm SDI BNC Male Silver-plated Coax Cable , BNC to BNC For MOKOSE USH3001

Multi rate support: Auto detection of SD or HD. Hdmi video inputs: HDMI Type A in. Software Control. Connector type: bnc male to BNC male, Cable diameter:2. 5mm, shelter: aluminium-foil paper+ silver-plated shielding braid, Resistance: 75 Ohm, Frequency: 0~3GHz Hdmi input. Use ptfe insulating material, high Temperature Resistance, It has characteristics of light weight, Good flexibility, corrosion resistance.

Dense two-layered foil and 95% tinned copper braid shield provide high shield performance. 2 x sdi Outputs. Rated cmr for installation in walls and risers. Updates, configurations and Power: Micro USB Update latest firmware for best compatibility. Cable length:3. 3ft1m, the Cable diameter:2. 5mm. Resistance:75 Ohm.

Sdi video outputs: automatically matches the SD, HD or 3G-SDI HDMI video input. Solid bare 18 awg etp Electrolytic Tough Pitch copper center conductor. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI. It copper conductor and silver-plated shielding braid, It has Good shielding, Few Signal Attenuation.




Similar products

Blackmagic Design Micro Converter HDMI to SDI (with Power Supply) BMD-CONVCMIC/HS/WPSU
Blackmagic Design Micro Converter SDI to HDMI (with Power Supply) BMD-CONVCMIC/SH/WPSU
Blackmagic Design HDMI to SDI Micro Converter, without Power Supply
SDI to HDMI, ABLEWE SDI HD-SDI 3G-SDI to HDMI 720p/1080p Adapter Video Converter with Embedded Audio
Eonvic HD SDI Video Cable Male HD SDI Extension Cable 60cm For BMCC BMPC Hyperdeck Cameras
CablesOnline, 1ft. BNC Male to BNC Male RG316 Coax Low Loss RF Cable, RF-BC101
Blackmagic Design Web Presenter
25 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
Blackmagic Design Micro Converter BiDirectional SDI/HDMI/PSU
NICEYRIG 3/8 Inch Camera Quick Release Screw Tripod Screw Adapter Connecter DSLR Camera Rig Accessories- 5 Pack


25 foot Black BJC 3G/6G HD SDI cable Belden 1694A, BNC to BNC

Automatic Input Signal Detection. Dense two-layered foil and 95% tinned copper braid shield provide high shield performance. Updates, configurations and Power: Micro USB Update latest firmware for best compatibility. Between is a foamed hdpe dielectric, which provides for the lowest possible capacitance, and best possible impedance consistency, in any precision video cable.

Blue jeans cable: professional precision Cable Assembly Our cables are assembled in our Seattle workshop by American workers, using the highest quality precision stripping and crimping equipment. Silver-plated shielding braid. Coax is stripped with precise dimensional control in our Swiss-made Schleuniger coaxial cable strippers, resulting in a shield braid undamaged by stripping and a center conductor of consistent maximum length for full engagement in the BNC pin crimp.

Copper conductor and silver-plated shielding braid, It has Good shielding, Few Signal Attenuation. Bnc to bnc coax Cable. Rated cmr for installation in walls and risers. The cable is rated cmr, cable trays, making it lawful for installation in walls, and risers--anywhere but in a plenum. Solid bare 18 awg etp Electrolytic Tough Pitch copper center conductor.

Dense two-layered foil and 95% tinned copper braid shield provide high shield performance. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI.


Similar products

50 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
Blackmagic Design Micro Converter HDMI to SDI (with Power Supply) BMD-CONVCMIC/HS/WPSU
Blackmagic Design Micro Converter SDI to HDMI (with Power Supply) BMD-CONVCMIC/SH/WPSU
150 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
BJC 3G/HD SDI Cable, made with Canare L-4CFB Cable and Canare BNCs, 3 foot
75 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
Blackmagic Design Micro Converter BiDirectional SDI/HDMI/PSU
15 foot Black BJC Mini 3G/6G HD SDI cable (Belden 1855A), BNC to BNC
MOKOSE 3.3Ft(1M) 3G HD-SDI Cables 75 Ohm SDI BNC Male Silver-plated Coax Cable , BNC to BNC For MOKOSE USH3001
Blackmagic Design Web Presenter


Blackmagic Design Micro Converter BiDirectional SDI/HDMI/PSU

Cable stock 100% sweep-tested to 4. 5 ghz to ensure full 3G/6G SDI performance. Solid bare 18 awg etp Electrolytic Tough Pitch copper center conductor. It can even be powered via USB or with the included international power pack. Cable stock 100% sweep-tested to 4. 5 ghz to ensure full 3G/6G SDI performance. It even automatically detects all SD and HD formats.

Updates, configurations and Power: Micro USB Update latest firmware for best compatibility. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI. Software Control. Solid bare 18 awg etp Electrolytic Tough Pitch copper center conductor. Resistance:75 Ohm. Sdi video outputs: automatically matches the SD, HD or 3G-SDI HDMI video input.

Sdi video inputs: 1 x sd, HD or 3G-SDI. Cable length:3. 3ft1m, the Cable diameter:2. 5mm. Hdmi outputs: hdmI Type A out. Blackmagic design hdmi to sdi micro Converter - Blackmagic Design 3 Year Limited Warranty.


Similar products

Blackmagic Design Micro Converter SDI to HDMI (with Power Supply) BMD-CONVCMIC/SH/WPSU
Blackmagic Design Micro Converter HDMI to SDI (with Power Supply) BMD-CONVCMIC/HS/WPSU
50 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
25 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
MOKOSE 3.3Ft(1M) 3G HD-SDI Cables 75 Ohm SDI BNC Male Silver-plated Coax Cable , BNC to BNC For MOKOSE USH3001
Blackmagic Design SDI to HDMI Micro Converter, Without Power Supply
Blackmagic Design Teranex Mini Smart Panel
Blackmagic Design HDMI to SDI Micro Converter, without Power Supply
J-Tech Digital Premium Quality SDI Splitter 1x4 Supports SD-SDI, HD-SDI, 3G-SDI up to 1320 Ft (1 Input and 4 outputs)
Blackmagic Design Web Presenter


Blackmagic Design SDI to HDMI Micro Converter, Without Power Supply

Sdi video inputs: 1 x sd, HD or 3G-SDI. Multi rate support: Auto detection of SD or HD. Rated cmr for installation in walls and risers. You also get 3g-sdi loop through, support for Level A and Level B equipment and power over USB! Hdmi input. Automatic Input Signal Detection. Hdmi outputs: hdmI Type A out. Hdmi video inputs: HDMI Type A in.

Hdmi outputs: hdmI Type A out. Supports sD and HD Signals. 2 x sdi Outputs. Software Control. Solid bare 18 awg etp Electrolytic Tough Pitch copper center conductor. Sdi video outputs: automatically matches the SD, HD or 3G-SDI HDMI video input. Dense two-layered foil and 95% tinned copper braid shield provide high shield performance.

Blackmagic design hdmi to sdi micro Converter - Blackmagic Design 3 Year Limited Warranty. Updates, configurations and Power: Micro USB Update latest firmware for best compatibility. Hdmi video inputs: HDMI Type A in. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI.

Cable length:3. 3ft1m, the Cable diameter:2.


Similar products

Blackmagic Design HDMI to SDI Micro Converter, without Power Supply
Blackmagic Design Micro Converter HDMI to SDI (with Power Supply) BMD-CONVCMIC/HS/WPSU
Blackmagic Design Micro Converter SDI to HDMI (with Power Supply) BMD-CONVCMIC/SH/WPSU
50 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
SDI to HDMI, ABLEWE SDI HD-SDI 3G-SDI to HDMI 720p/1080p Adapter Video Converter with Embedded Audio
MOKOSE 3.3Ft(1M) 3G HD-SDI Cables 75 Ohm SDI BNC Male Silver-plated Coax Cable , BNC to BNC For MOKOSE USH3001
Blackmagic Design Micro Converter BiDirectional SDI/HDMI/PSU
Monoprice 3G SDI 1x4 Splitter
J-Tech Digital Premium Quality SDI Splitter 1x4 Supports SD-SDI, HD-SDI, 3G-SDI up to 1320 Ft (1 Input and 4 outputs)
Decimator Design MD-LX Bi-Directional HDMI/SDI Converter


J-Tech Digital Premium Quality SDI Splitter 1x4 Supports SD-SDI, HD-SDI, 3G-SDI up to 1320 Ft 1 Input and 4 outputs

Solid bare 18 awg etp Electrolytic Tough Pitch copper center conductor. Hd mode: up to 660 ft. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI. Hdmi video inputs: HDMI Type A in. Rated cmr for installation in walls and risers. This splitter can be widely used in SDI broadcast room, no-linear editing field, CCTV security system and training showroom etc.

Using broadcast quality processing technology, it delivers high definition, lossless and lag-free distribution. Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI. Support sd-sdi270mbps, hd-sdi1. 485gbps and 3g-sdi2. 97gbps and distribute to 4 simultanous SDI outputs.

J-tech digital is focused on providing high-quality products that integrate and distribute home entertainment for the residential and commercial markets. Resistance:75 Ohm. Includes +5v universal power supply with international socket adapters. Rated cmr for installation in walls and risers. Sdi video outputs: automatically matches the SD, HD or 3G-SDI HDMI video input.

Blackmagic design hdmi to sdi micro Converter - Blackmagic Design 3 Year Limited Warranty.


Similar products

SDI to HDMI, ABLEWE SDI HD-SDI 3G-SDI to HDMI 720p/1080p Adapter Video Converter with Embedded Audio
Blackmagic Design Micro Converter SDI to HDMI (with Power Supply) BMD-CONVCMIC/SH/WPSU
Blackmagic Design Micro Converter HDMI to SDI (with Power Supply) BMD-CONVCMIC/HS/WPSU
HDMI to SDI Converter Adapter HDMI SDI Adapter SDI/HD-SDI/3G-SDI Adapter Support 1080P for Camera Home Theater
SDI to HDMI Converter Adapter Mini 3G HD Sdi Hdmi Adapter for SD-SDI, HD-SDI and 3G-SDI signals
50 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
Blackmagic Design Micro Converter BiDirectional SDI/HDMI/PSU
Blackmagic Design SDI to HDMI Micro Converter, Without Power Supply
Decimator Design MD-LX Bi-Directional HDMI/SDI Converter
MOKOSE 3.3Ft(1M) 3G HD-SDI Cables 75 Ohm SDI BNC Male Silver-plated Coax Cable , BNC to BNC For MOKOSE USH3001


Monoprice Viper Series HD-SDI RG6 BNC Cable, 50ft

Multi rate support: Auto detection of SD or HD. Dense two-layered foil and 95% tinned copper braid shield provide high shield performance. Hdmi outputs: hdmI Type A out. 18 awg pure copper conductor. Cable stock 100% sweep-tested to 4. 5 ghz to ensure full 3G/6G SDI performance. Copper conductor and silver-plated shielding braid, It has Good shielding, Few Signal Attenuation.

Bnc to bnc coax Cable. Rated cmr for installation in walls and risers. Silver-plated shielding braid. Dense two-layered foil and 95% tinned copper braid shield provide high shield performance. Cable length:3. 3ft1m, the Cable diameter:2. 5mm. Sdi video outputs: 1 x SDI loop out. Software Control. It is great for use in hd-serial digital video transfer, broadband facilities, HDTV upgrades, mobile apps, and other applications with HD-SDI video.

The cable is a bnc-terminated, high-performance RG6 coaxial cable with dual aluminum and copper braided shields, making the cable flexible and strong. Buy with confidence: with monoprice's Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.


Similar products

Blackmagic Design Micro Converter SDI to HDMI (with Power Supply) BMD-CONVCMIC/SH/WPSU
Blackmagic Design Micro Converter HDMI to SDI (with Power Supply) BMD-CONVCMIC/HS/WPSU
Blackmagic Design HDMI to SDI Micro Converter, without Power Supply
Blackmagic Design SDI to HDMI Micro Converter, Without Power Supply
SDI to HDMI, ABLEWE SDI HD-SDI 3G-SDI to HDMI 720p/1080p Adapter Video Converter with Embedded Audio
SDI to HDMI Converter Adapter Mini 3G HD Sdi Hdmi Adapter for SD-SDI, HD-SDI and 3G-SDI signals
HDMI to SDI Converter Adapter HDMI SDI Adapter SDI/HD-SDI/3G-SDI Adapter Support 1080P for Camera Home Theater
RiteAV - 100FT BNC Video Cable HD/SDI Digital Video - 75 Ohm (Indoor & Outdoor Rated) - Compression Connectors
wlaniot BNC Adapter BNC Female to BNC Female Barrel Straight RF Coaxial Connector for HD CCTV DVR Surveillance System Video Camera Broadcast Applications 5pcs


Monoprice Viper Series HD-SDI RG6 BNC Cable, 100ft

Coaxial cable specifically manufactured for the exacting high-bandwidth requirements of 3G/6G and HD SDI. 75-ohm impedance | diameter: 0303 inches 100% sweep tested. Hdmi outputs: hdmI Type A out. Silver-plated shielding braid. Includes +5v universal power supply with international socket adapters. Dense two-layered foil and 95% tinned copper braid shield provide high shield performance.

Hdmi video inputs: HDMI Type A in. Plug & play; durable metal enclosure; Free lifetime technical support and one-year warranty by J-Tech Digital!18 awg pure copper conductor. Rg6 digital spec coaxial cable Dual copper and aluminum shielding. The cable is a bnc-terminated, high-performance RG6 coaxial cable with dual aluminum and copper braided shields, making the cable flexible and strong.

Dense two-layered foil and 95% tinned copper braid shield provide high shield performance. Rated cmr for installation in walls and risers. Automatic Input Signal Detection. With sdi repeater function, providing equalized and re-cloked transmission, and supporting signal input and output distances of up to 1320 ft for SD-SDI signal, 660 ft for HD-SDI signal and 330 ft for 3G-SDI signal by Belden 1694A cable.

Wide voltage design, can support DC 5V~30V voltage input lowest power is 5V, more suitable for projects.


Similar products

Blackmagic Design Micro Converter SDI to HDMI (with Power Supply) BMD-CONVCMIC/SH/WPSU
Blackmagic Design Micro Converter HDMI to SDI (with Power Supply) BMD-CONVCMIC/HS/WPSU
HDMI to SDI Converter Adapter HDMI SDI Adapter SDI/HD-SDI/3G-SDI Adapter Support 1080P for Camera Home Theater
Blackmagic Design Micro Converter BiDirectional SDI/HDMI/PSU
Blackmagic Design SDI to HDMI Micro Converter, Without Power Supply
Blackmagic Design HDMI to SDI Micro Converter, without Power Supply
50 foot Black BJC 3G/6G HD SDI cable (Belden 1694A), BNC to BNC
BNC Connector - Coupler (6 Pack) BNC Female to Female, Adapter for CCTV
Decimator Design MD-LX Bi-Directional HDMI/SDI Converter
J-Tech Digital Premium Quality SDI Splitter 1x4 Supports SD-SDI, HD-SDI, 3G-SDI up to 1320 Ft (1 Input and 4 outputs)